NEWS


[Product] PixelPATT

 

PixelPATT


  • SOURCE

    • Light source type: 7x 30W RGBW multichips
    • LED life expectancy: min. 20.000 hours
    • Typical lumen maintenance: 70% @ 20.000 hours
  • OPTICAL SYSTEM

    • 7x 200mm parabolic aluminium reflector with special gold-brown coating
    • 7x half-ball diffusor dome distributing light evenly from RGBW LED source inside of the reflector
  • DYNAMIC EFFECTS

    • Colour mixing mode RGBW or CMY
    • Individual control of each RGBW pixel
    • Variable CTO: 2.700K - 8.000K
    • Virtual Colour Wheel: with 66 preset LEE swatches
    • Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
    • Shutter: Electronic with variable speed strobe (max. 20 flashes per second)
    • Pre-programmed random strobe & pulse effects
    • High resolution electronic dimming: 0 - 100%
  • CONTROL AND PROGRAMMING

    • PATT Driver: external
    • Setting & Addressing: two-row LCD display & 4 control buttons
    • Protocols: USITT DMX-512, RDM, ArtNet, Kling-Net, sACN
    • Wireless CRMX™ technology from Lumen Radio (on request)
    • DMX Protocol modes: 6
    • Control channels: 13, 32, 40, 47, 53, 60
    • RGBW or CMY: 8 or 16 bit (internal 18 bit)
    • Dimmer: 8 or 16 bit (internal 18 bit)
  • THERMAL SPECIFICATION

    • Maximum ambient temperature: 45°C (113°F)
    • Maximum surface temperature: 70°C (158°F)
    • Minimum operating temperature: -5°C (23°F)
  • ELECTRICAL SPECIFICATION AND CONNECTIONS

    • PATT Driver:
      • Power supply: Electronic auto-ranging
      • Input voltage range: 100 - 277 V, 50/60 Hz
      • Power consumption: 240 W
      • Power in/out connector: Neutrik powerCON TRUE1 in/out
      • DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
      • Embeded Ethernet switch 10/100 Mbps: 1x IN/1x Out
      • Ethernet port in/out: RJ45
      • Power and Data out: Locking 4-pin XLR (from PATT Driver to the pixelPATT)
    • pixelPATT:
      • Power and Data in: Locking 4-pin XLR
  • APPROVALS

    • CE Compliant
    • cETLus Compliant (pending)
  • MECHANICAL SPECIFICATION

    • PATT Driver:
      • Height: 358 mm(14.1")
      • Width: 82 mm (3.2")
      • Depth: 162 mm (6.4")
      • Weight: 3.0 kg (6.6 lbs)
    • pixelPATT:
      • Height: 924 mm (36.4")
      • Width: 870 mm (34.3")
      • Depth: 157 mm (6.2")
      • Weight: 11.8 kg (26 lbs)
  • RIGGING

    • Mounting points:
      • Driver: 1x Half-couple clamp, 1x Safety attachment point
      • pixelPATT: 1x 13mm hole for Clamp mounting
    • Operating position:
      • PATT Driver: Floor standing on mounted on truss in vertical position
      • pixelPATT: any operating and mounting position